Hand Controls

Dual Cable Throttle Sleeve

for 99-17 Twin Cam and 86 - 20 XL models (except 08-17 FLHT/FLHR/FLHX/FLTR and H-D FL Trike, 16-17 Softail, 16-17 FXDLS, 14-15 FLSTNSE, 13-15FXSBSE, 11-12 FLSTSE)

Banjo Bolt Brake Switch 3/8"-24 Threads

Brake line banjo bolt with built-in hydraulic brake light switch. 3/8"-24 thread. Mounts directly to the master cylinder through the brake line banjo fitting. Eliminates the conventional brake tee fitting that is required to mount the standard brake light switch. Simplifies the installation of custom length brake lines. Switch has normally open electrical contacts (no electrical current flow until actuated by hydraulic pressure).

1" Throttle Assembly with Tube

Kit includes chrome-plated throttle cable housing clamp with throttle return tension adjusting screw and nylon throttle sleeve. Available in single and dual cable models. 

1" Vintage Handlebar Control Kit with Master Cylinder & Clutch  Harley and Custom Motorcycle

Slim line master cylinder and clutch for 1" motorcycle handlebars. Fits Harley 'ring' type clutch cable found on EVO Sportsters and other models. Also includes an end for a barrel style clutch cable fitting. Some models may require clutch cable modification. 9/16" (14mm) bore for most single caliper/disc applications. Master cylinder uses DOT 5 Brake Fluid.

Includes 3/8"-24 banjo bolt and sealing washers.

TBW Throttle Sleeve

Fits 08-19 FLHT/FLHRFLHX/FLTR models and H-D FL Trike, 16-20 Softails, 16-17 FXDLS

Jockey Shifter and Suicide Clutch Kit - VT600 - All Years

The BOLT-ON Jockey Shifter and Suicide Clutch Kit for the Honda Shadow VT600, VLX600 is the first of its kind to be produced for the Honda Shadow motorcycle! 

Fits:

• Honda Shadow VT600 1988 - 2007

The Jockey Shift and Suicide Clutch Kit for bobbers and choppers is a breeze to install, requiring zero fabrication, you will only need a few wrenches, and some allen/hex keys to get your bike rolling!  The Aluminum Shift knob is threaded at 3/8-16".  This is an amazing upgrade for your Honda Shadow!

You can use your stock clutch cable or pick up a 2" shorter clutch cable! The kit will come partially assembled, you will need to use Loctite and adjust everything before you ride. Tighten the Jockey Shift set screws down tightly!

Each Suicide Clutch Kit will include a replacement forward engine mount bolt and 3 stainless cap head screws to bolt the clutch backing plate to your stator case! Jockey Shifters will include the adapter, arm, hardware, and TJ Brutal Customs aluminum shift knob which threads onto the shifter arm.

**Note:  Please use loc-tite on all threads before riding. For case, bolts use anti- seize**

The Suicide Clutch Kit DOES NOT fit the VT750, however, the Jockey Shifter arm will.

Check out the video for a simple step-by-step install!

Add a nice billet touch to your ride by changing your stock Control Clamps. Our OG Billet Clutch / Brake Perch Clamps are machined from a solid block of 6061 Aluminum. Simply the best bang for the buck quality-wise.

*For OEM controls ONLY. Does not work with aftermarket master cylinders such as Brembo and Beringer. Does not work with aftermarket clutch lever assemblies such as Elite Mototech or 1FNGR.

Features

• 
  CNC machined 6061 T6 aluminum


• Hard Anodized & chromed finishes available


• CNC Machined OG logo
  


• Stainless steel hardware included (Both Metric screws for newer Sportster & Indians models & STDs screws for all other H-Ds models.


• Sold in pairs (Left & Right)
  

Fitment

• 
  Fit all Sportster, Dyna & FXR
  


• Fits all 1984-2024 Softail models


• 
  Fits 1984 to 2023 Touring models


• Do not fit 2023 CVO & 2024 to present Touring models


• Do not fit 2025 to present Softail models

*For OEM controls ONLY. Does not work with aftermarket master cylinders such as Brembo and Beringer. Does not work with aftermarket clutch lever assemblies such as Elite Mototech or 1FNGR.

Throttle - Aluminum Black

Forged in Italy, these throttles are exactly what you're looking for if you have a custom build with style and quality. Available in 1" and 7/8" 

Premium 7/8" Single Cable Motorcycle Throttles for Custom Builds

TC Bros precision-engineered motorcycle throttles are essential components for custom motorcycle builds featuring 7/8" handlebars. These high-quality single cable throttle assemblies provide smooth, reliable throttle operation and are available in two finish options to match your bike's aesthetic preferences.

Available Finishes:

• Black - Sleek black finish for a modern, stealthy appearance
• Polished - Classic polished finish for a traditional, refined look

Key Features:

• Precision Engineered - Designed for smooth, reliable throttle operation
• 7/8" Diameter - Designed specifically for 7/8" handlebars (standard size)
• Single Cable Design - Uses one cable to open the throttle with return spring closure
• Quality Construction - Durable materials for long-lasting performance
• Professional Quality - Manufactured to TC Bros' exacting standards
• Easy Installation - Direct replacement for stock throttle assemblies

Choosing the Right Finish:

Black: The sleek black finish complements blacked-out builds and contemporary custom motorcycles. Provides a modern, stealthy appearance that works beautifully with matte or satin black components. Perfect for bobbers, trackers, and modern customs.

Polished: The classic polished finish works beautifully with traditional custom builds, cafe racers, and bikes featuring chrome or polished components. Offers a refined, timeless appearance that never goes out of style.

Specifications:

• Handlebar Size: 7/8" (22mm) - Standard motorcycle handlebar size
• Cable Type: Single Cable (with return spring)
• Finish Options: Black or Polished
• Precision-engineered for smooth operation

Perfect For:

• Custom motorcycle builds with 7/8" handlebars
• Chopper and bobber conversions
• Cafe racer and tracker builds
• Scrambler and street fighter builds
• Replacing worn or damaged throttle assemblies
• Upgrading to premium components
• Matching your bike's color scheme

Installation Notes:

These throttles are designed for single cable applications. Ensure your motorcycle uses a single cable throttle system before ordering. Proper cable routing and adjustment is critical for safe, smooth throttle operation. Professional installation is recommended if you're not experienced with throttle system maintenance.

Important: Always verify your throttle returns to closed position smoothly and completely after installation. Test throttle operation thoroughly before riding.

Each TC Bros motorcycle throttle is precision-manufactured to ensure reliable performance and long service life on your custom motorcycle.

Premium 1" Motorcycle Throttles for Custom Builds

TC Bros precision-engineered motorcycle throttles are essential components for custom motorcycle builds featuring 1" handlebars. These high-quality throttle assemblies provide smooth, reliable throttle operation and are available in multiple configurations to match your bike's cable setup and aesthetic preferences.

Available Options:

Cable Type: Single Cable or Dual Cable
Finish: Black or Polished

• Single Cable - Black - Sleek black finish for single cable applications
• Single Cable - Polished - Classic polished finish for single cable setups
• Dual Cable - Black - Black finish for dual cable (push-pull) applications

Key Features:

• Precision Engineered - Designed for smooth, reliable throttle operation
• 1" Diameter - Designed specifically for 1" handlebars
• Quality Construction - Durable materials for long-lasting performance
• Multiple Configurations - Choose single or dual cable based on your bike's setup
• Professional Quality - Manufactured to TC Bros' exacting standards
• Easy Installation - Direct replacement for stock throttle assemblies

Choosing the Right Configuration:

Single Cable vs. Dual Cable:

• Single Cable: Uses one cable to open the throttle, with a return spring to close it. Common on older motorcycles and many custom builds. Simpler installation with fewer cables to route.
• Dual Cable (Push-Pull): Uses two cables - one to open the throttle and one to close it. Provides more positive throttle control and is required on many modern motorcycles. Offers smoother operation and better safety.

Black vs. Polished:

• Black: Sleek black finish complements blacked-out builds and contemporary custom motorcycles. Provides a modern, stealthy appearance.
• Polished: Classic polished finish works beautifully with traditional custom builds, cafe racers, and bikes featuring chrome or polished components.

Specifications:

• Handlebar Size: 1" (25.4mm)
• Cable Types: Single Cable or Dual Cable (Push-Pull)
• Finish Options: Black or Polished
• Precision-engineered for smooth operation

Perfect For:

• Custom motorcycle builds with 1" handlebars
• Chopper and bobber conversions
• Cafe racer and tracker builds
• Replacing worn or damaged throttle assemblies
• Upgrading to premium components
• Matching your bike's color scheme and cable configuration

Installation Notes:

Ensure you select the correct cable type (single or dual) based on your motorcycle's throttle cable configuration. Proper cable routing and adjustment is critical for safe, smooth throttle operation. Professional installation is recommended if you're not experienced with throttle system maintenance.

Important: Always verify your throttle returns to closed position smoothly and completely after installation. Test throttle operation thoroughly before riding.

Each TC Bros motorcycle throttle is precision-manufactured to ensure reliable performance and long service life on your custom motorcycle.

Our OG 2024-Up Touring Quick-Connect Upper clutch cable will make your bar & risers upgrade as seamless and simple as possible. This kit includes only the necessary Upper Clutch Cable that we recommend changing when installing Risers on the newer 2023 to present CVO & 2024 to present Touring models. It will make your installation much simpler and cleaner by eliminating the very restrictive OEM bent tube pieces on the stock cable. Custom-made by Magnum for premium quality fit & finish.

Features

• Easily and quickly connects to the existing lower cable section


•  Significantly reduces installation time


• Braided stainless steel cables coated with a non-yellowing, crystal-clear PVC outer jacket


• Low-effort, high-efficiency cable design meets or exceeds OE specifications for fitment, construction, and endurance


• Braid color and weave match on all MAGNUM control cables and brake lines

Fitment

• 2023 to present CVO & 2024 to present Touring models

Chrome Dual Cable Throttle Assembly With Grips

• A style to fit aH-D 81-96 models, dual-cable
• Complete dual-cable throttle assembly
  
• Accepts thread-in cables
• Sold with matching left grip
  

Handlebar/Cable Line Install Kit Honda Rebel CMX1100

• Designed to mate perfectly to your late model Honda Rebel when using Burly Brand 12" Ape Hanger handlebars
• Burly has engineered this kit to end the guesswork, eliminate mismatched lines and floppy cables
• Kit includes extended throttle cables, extended clutch cable, brake line, E-brake cable and wiring harness for control switches and throttle control
• Detailed instructions included

Easy Cruise Throttle Lock

Add cruise control to your motorcycle. Eliminate wrist strain on long rides. Reach your perfect speed, set it, and forget it! Fits all motorcycle handlebars.

• Made of NYLATRON thermoplastic resins, which are lightweight, and resistant to wear, heat, cold, and impact, while also having a high tensile strength 
• Easy to install
• Easy to remove if you need to install it on a different motorcycle
• The included rubber ring creates additional friction, which prevents accidental changes in speed

Rebuild Kit for Clutch and Brake Master Cylinder 14mm (9/16") Bore

Rebuild kit for brake master cylinder 14mm (9/16”) bore

"Super Prism" Throttle Lock

• Includes thumb screw and spring
• Screws right into the "Super Prism" Throttle

The Acerus - Single Cable Throttle Assembly For Honda Shadow - Brass

The Acerus single cable throttle assembly for the Honda Shadows is machined from billet aluminum and made to work seamlessly with the stock Honda Shadow throttle pull cable.  That's right! You do not need to run a push cable!  The stock throttle assembly is quite bulky and lacks any kind of visual aesthetic. Who are we kidding, it's totally haggard! Many folks wish to clean up their bikes' cockpit by removing the stock assembly, relocating their switches, (videos HERE) getting rid of the push cable,https://youtu.be/zXaumYHMutE and going to a single pull cable (videos HERE).

Specs:

• Machined from 6061A Aluminum
• Fits 1" handlebars 
• Stainless #8-32 bolts (req. 9/64 allen)
• Threaded for Honda throttle pull cables ONLY

The Acerus allows you to maintain a clean, focused, and custom look on your bars with no unnecessary fluff, but enough style to show you have superb taste. because you definitely do, you got-dang champion! 

Fits the following models throttle cables -
Honda Rebel
Honda Shadow VLX600 / VT600
Honda Shadow VT750, ACE, Aero, Spirit, Phantom, RS
Honda Sabre
Honda Magna
Honda VT1100
Honda VTX
*May fit other metric bikes.
* Some models' stock throttle sleeves may not fit.  

For a perfect fit, it is recommended to pair this with the Malleus Machined Gripset!
Do not over tighten clamp bolts. Use red Loctite on the bolts. Fits 1" bars, will accommodate most grips for 1-inch bars. When clamping the assembly on your bars, a small gap between the upper and lower halves is normal, this ensures that the clamp isn't bottomed out before it can adequately clamp the bars. This allows the clamp to work well on raw material bars or bars that have plating or powder coating. When installing on powder-coated bars, it may be necessary to use a mallet to tap the halves of the assembly together so the bolts can grab the threads. Powder coating isn't an exact science and the thickness can vary from brand to brand, there is no way to anticipate this and if we made the clamps ID bigger, it wouldn't fit chromed bars.  
We advise using a bit of lubricant inside the throttle assembly and under the throttle sleeve for smooth twist action and prolonged life of the parts.  

1" Deluxe Line Clutch Lever Assembly 

Made from forged aluminum body, our DELUXE line cable control comes in aluminum clamp with brass or aluminum lever, perfectly matching our deluxe master cylinder, available for clutch side or for brake side, it fits all 1" handlebars. The left side comes with a special cable pin, for early and late cable clutches. The right side works perfectly with mechanical drum brakes, with our wire master cylinder, and in many custom applications. Available in 4 different finishes, polish, satin, raw and black finish. NOTE: the brass cable register is sold separately.

Acorn Shift Knob

• Threads are 3/8-24
• 1-1/8" diameter head
• Made of phenolic plastic