Motogadget mo.unit blue
Regular price $549.95L/W/H | 90 x 53 x 30 mm, bolt distance 74 mm |
Weight | Approx. 180 g |
Fastener | 2 x M5 stainless steel bolts (installation and ground connection), 1 x M5 screwing contact for battery Plus |
Operating voltage | 6 V - 20 V |
Operating temperature | -20°... +80°C |
Inputs | 1 x input (+12 V switched) for the ignition lock or m.lock 11 x control input (minus/switched to ground) for: Left turn signal Right turn signal Lo/Hi-beam Starter Horn Brake light Kill switch Stand switch LIN bus AUX1 AUX2 |
Outputs | 10 x Outputs (+12V) for: Left turn signal Right turn signal Lo-beam Hi-beam Starter Horn Brake light Ignition AUX1 AUX2 |
XSCHARGE™ - XS650 Permanent Magnet Alternator Kit PMA
Regular price $499.95The weakest point of a Yamaha XS650 is the charging system. As your bike is now 30 to 40 years old, your stock components have had plenty of time to deteriorate from several factors including vibration, moisture, and just old age. It is just a matter of time before one or more of the components are going to fail you and leave you stranded.
The major downfall to having a stock charging system is that it uses an electromagnet to produce voltage to charge your battery. Your XS650 must have a good charged battery to run, spark, and charge. So if for any reason your battery becomes depleted (you forget to turn off your key, you have a loose connection, or the battery just goes bad) you will be stranded whether you try kickstarting your bike or not.
This all is eliminated with the permanent magnet alternator kit. Your bike does not use an electromagnet in your alternator therefore you won’t get stranded if your accidentally leave your lights on or your battery goes dead.
Another downfall to all stock XS650 charging systems is that they use carbon brushes to send voltage to your rotor, over time these brushes wear down causing your bike alternator to lose contact with the rotor and your bike will fail to charge your battery. With the permanent magnet alternator there are no wearing parts, so you will have a maintenance free charging system.
Another downfall to the early model XS650's is that you have a separate rectifier and regulator on your bike, the regulator operates on an old "points" style system. Eventually the regulators will fail because of wear in the moving parts and old age. The permanent magnet alternator comes with a new solid state combined rectifier/ regulator (no moving parts to fail) that looks much cleaner and will outperform and outlast the original Yamaha equipment.
One great advantage of this kit is that it will allow you to eliminate your battery from your system (and replace with a capacitor) for an ultra clean look.
NO CUTTING OR SPLICING OF YOUR STOCK WIRING HARNESS IS REQUIRED!
The kit comes with detailed installation instructions with photos and it is an easy 2 wire hook up (just hook the positive red wire to your battery positive and the negative green wire to your battery ground).
Fits 1970-79 XS650 with OEM points ignition (or Cam-Timed Ignition systems such as XSCHARGE or Boyer Brandsen).
It will also fit 1980-83 models running Aftermarket Cam-Timed Ignition Systems such as XSCHARGE or BOYER
WILL NOT WORK WITH FACTORY YAMAHA TCI (CDI) ELECTRONIC IGNITION.
Prism Supply Co Cloth Spark Plug Wires
Regular price $35.00Prism Supply Co runs these spark plug wires on all of their Prism builds and we guarantee you won't be disappointed with the quality.
Motogadget Mo.lock NFC
Regular price $249.95Transmitter/receiver, diameter of installed assembly | 32 mm |
Height | 12 mm without terminals and bracket |
Weight incl. cable | approx. 35 g |
Fixture | 1 x M3 threaded hole on back side |
Operating voltage | 8V - 18V |
Operating temperature | -20 °C... +80 °C |
TJ Brutal Customs Push Button Off-(On) Starter Switches
Regular price $38.21These high-quality momentary push buttons can be used for all sorts of things, but a popular choice is to use these to move your start button off of your handlebars. The screw terminals make these an easy install. They do require a 0.750" hole to install.
Rick's Motorsports Reg/Rec Lithium Ion
Regular price $159.95Rick's Motorsport Electrics Aftermarket Lithium-Ion Compatible Rectifier-Regulator is designed with a lower voltage set point to work with lithium-ion batteries. Rick's part # 14-113 is a plug n play piece for Vintage Honda Street Bikes with the following OE #'s 31600-460-731 and 31600-426-000. *Please test your rotor before installing the new rectifier-regulator. **This rec-reg is not for use with standard lead-acid batteries. The voltage set point is 14V +/- .2. Please contact the manufacturer of your Lithium-Ion Battery to ensure our product has the correct setpoint for their product. ***Rick's Motorsport Electrics One Year Product Warranty is for the Rec-Reg only. Rick's warranty does not cover batteries of any type.
V-Factor Universal Ignition Switch
Regular price $77.27Universal four-position momentary ignition switch.